Contact Us
Home » Products » Single Phase Watt-Hour Meter / KWH Meter (Kilowatt Hour Meter) » PS-5 Single Phase Electromechanical Watt-Hour Meter
PS-5 Single Phase Electromechanical Watt-Hour Meter

PS-5 Single Phase Electromechanical Watt-Hour Meter

The single phase electromechanical watt-hour meter is designed to meet the IEC60521-1988 and BS EN 60521 standards for both indoor and outdoor installations. The meter with mechanical construction complying BS5685 is also available. With accuracy of class 2, it measures active energy in single-phase two-wire or three-wire alternating current power grids.

Features
1. Connection is direct or by instrument transformers.
2. The average service life (MTTF)is 10 years and the maximum overload capacity is 500%lb.
3. The meter is KEMA certified and the design can be tailored to different customer requirements.

Components of Single Phase Watt-Hour Meter
1. Meter case
Two types of cases are available One is the insulating case of protective-classⅡ and the other is the weather-proof case complying to IEC60529 and Ip54

2. Terminal block
The terminal block is molded of bakelite. The voltage test link can be located inside or out-side of the meter case. The maximum diameter of the terminal hole is 8.5mm.

3. Driving element
The driving element consists of a voltage element and a current element, both of which are fixed to the frame. The voltage element has a low load adjustment mechanism, and the current
element has an inductive load adjustment mechanism.

4. Rotor
The rotor shaft is made of aluminum alloy with a small hole in the upper end for storing lubrication and for fitting a brass bearing The worm is turned of brass, and is acid-cleaned or nickel-plated.
The worm and shaft can be detached.

5. Braking element
The magnet is made of AINiCo5 alloy and designed as U-shaped so that the effect of short-time over current upon the magnet is negligible. The full load error can be fine controlled by adjustment mechanism.

6. Frame
The frame is die-casted by high-quality SiAl alloy of stable property to avoid distortion. The application of static spray-painting on the surface prevents the frame from oxidation.

7. Upper bearing
The pin is made of high-quality abrasion-proof stainless steel and is embedded on the brass pin base.

8. Lower bearing
Both double jewel bearing and magnetic bearing are available.

9. Register
The meter with direct-reading cyclometer type register is available.
The register is self-located and is mounted on the frame by one screw. Fixing with two screws is also available but needs to be manually adjusted. There are two types of gears available: brass gears and self-lubricating plastic gears.

Typical Connection Diagram of Single Phase Watt-Hour Meter

Outline & Installation Size

Technical Parameters of Single Phase Watt-Hour Meter

1 Meter type PS-5
2 Applicable Standards IEC60521. IEC514
3 Accuracy Class 2 (according to IEC60521)
4 Average service life (MTTF) 10years
5 Basic current (lb) A 1.5 2.5 3 5 10 15 20 30
6 Maximum current (lmax) A 6 10 12 20 40 50 60 80 100
7 Rating current of transformer in 5A Direct connection
8 Reference voltage Un 110V,120V,220V,230V,240V
9 Reference frequency fn 50Hz,60Hz
10 Power losses in voltage circuit at Un 50Hz: 1.2W/6VA, 60Hz: 1.0W/5VA
11 Power losses in current circuit at 50Hz Un Ib <0.6VA
12 Non-running with no-load 0.8~1.1Un
13 Starting current 0.5%lb
14 Mean temperature coefficient: Form0.1lb to lmax at unity PF Form 0.2lb to lmax at unity 0.5lagging <0.08%/℃ <0.12%/℃
15 Insulation level: Withstanding A.C. voltage for 50Az, 1min Withstanding impulse voltage 1.2/50us >2kV(when bakelite base>4kV) >6KV(when bakelite base>8kV)
16 Rated load speed at unity PF, lb 13.2r/min
17 Rated load torque at unity PF, lb 450uNm
18 Weight of rotor 24g
19 Weight of meter 1.5~1.6kg
20 Meter base Steel, Aluminum alloy, Bakelite
21 Meter cover ABS, Aluminum, Glass, Bakelite, transparent PC
22 Terminal cover ABS, Bakelite, PC
23 Register Cyclometer single, Unidirectional, Jumping , Metal
24 Option Reverse running stopper, pulse sampling device
Feedback Form
Other Products
Company Brief: Established in 1995, Geyu Machine Electricity Co., Ltd. is one of the leading manufacturers of low voltage electric equipment in China, such as KWH Meters (Kilowatt Hour Meters), Power Capacitors, Circuit Breakers and AC Contactors for buildings and industries. Our KWH Meters (Kilowatt Hour Meters), Power Capacitors and other products all meet ISO9001 standards, and meet the requirements of Implementation Rules for Compulsory Certification. We strive to balance environmental and economic objectives, integrating them into our business plan.